<
Start your project today!
Get a FREE In-Home Consultation
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form. Please check your entry and try again.
Contact Us


Replacement Windows, Siding & Doors in Pleasanton

The East Bay’s most experienced exterior remodeling company

Serving Pleasanton, Dublin, Livermore, San Ramon, and the surrounding Tri-Valley since 1997. We install Infinity from Marvin windows, James Hardie fiber cement siding, and ProVia entry doors. Our AAMA Certified Master Installers (American Architectural Manufacturers Association) are full-time Custom Exteriors employees, not subcontractors. We are are also EPA Lead-Safe Certified for Older (Pre-1978) Bay Area Home Renovation Safety.

Why Custom Exteriors

What makes the installation matter as much as the product

The best window on the market fails if it's installed incorrectly. Improper flashing, poor air sealing, or misaligned frames void warranties and create moisture problems. The installer matters.

AAMA
Certified Master Installers
AAMA (American Architectural Manufacturers Association) certification is the highest installer credential in the window and door industry. Most installers, even experienced ones, are not AAMA certified. Ours are, and they're our full-time employees, not subcontractors.
29
Years in the same location
We've been at 2142 Rheem Drive in Pleasanton since 1997, serving the same communities under the same name. If something goes wrong with your installation in year three, we're still here to make it right, not a disconnected phone number.
30K+
Projects completed in the East Bay
Over 30,000 completed projects in Pleasanton, Dublin, Livermore, San Ramon, Danville, Walnut Creek, and surrounding communities. That's not a national average. It's work done by the same team that will be on your project.
Platinum Partner, Infinity from Marvin
Platinum Partner is Infinity from Marvin's highest certification tier. It reflects installation volume, quality standards, and training requirements that most window contractors never reach. Our Pleasanton showroom has full-size displays. The difference between fiberglass and vinyl must be seen to be understood.
Special Offer!
18 Months
ZERO Payments + ZERO Interest OR 4.99% Financing on Approved Credit
LEARN MORE →
No Surprises.

Here's What the Process Looks Like.

From first contact to final walkthrough, the average window replacement project with Custom Exteriors is straightforward. Here's what to expect.

GET STARTED →
1. Schedule a consultation
A design consultant visits your home, reviews the windows, explains your options, and answers questions, at no cost and with no obligation. We never use high-pressure tactics.
2. Visit the showroom
(Optional but recommended.) Our Pleasanton showroom at 2142 Rheem Drive has full-size Infinity from Marvin displays. You can see the weight difference, feel the frame quality, and compare finishes before committing.
3. Custom order and scheduling
Windows are ordered to your specs once you decide. Your project manager confirms the installation schedule and keeps you informed of any lead time changes before they affect your timeline.
4. Installation by our crew
Our AAMA Certified Master Installers handle the full installation. They confirm lead-safe procedures before starting on homes built before 1978, clean up completely, and do a final walkthrough with you before leaving.

Meet With a Design Expert in Our Showroom

sHOWROOM dETAILS

Why The Materials You Choose Matter More Than Most Contractors Will Tell You

The Bay Area puts exteriors through a demanding combination of conditions: coastal moisture, inland summer heat that can reach 105°F in the Tri-Valley, and year-round sun exposure that degrades finishes faster than most product warranties acknowledge.

  • Lower energy bills year-round — proper seal integrity and multiple glass/insulation packages reduce heat gain and loss.
  • Improved comfort throughout the home — no cold spots in December, no unbearable rooms in August.
  • Quieter interior — premium glazing and construction reduce exterior noise.
  • Increased resale value — named manufacturer warranties transfer with the home.
  • Virtually no maintenance — fiberglass and fiber cement don't rot, warp, or require repainting.
  • Curb appeal that holds — dozens of color, profile, and style options across all three product lines.
Full-Service Exterior Remodeling

Windows, Patio Doors, Entry Doors & Siding

Infinity from Marvin Windows

Fiberglass outperforms vinyl in expansion tolerance, seal integrity, and strength-to-weight ratio.

Learn More →

Infinity Patio Doors

Sliding, French, and bi-fold configurations engineered for indoor-outdoor living.

Learn More →

ProVia & Therma-Tru Entry Doors

One of the highest-return exterior upgrades, a design process, not a transaction.

Learn More →

James Hardie Siding

Non-combustible construction matters for wildfire-adjacent East Bay homes.

Learn More →

Recognized by

When you're comparing contractors, third-party recognition gives you something to verify beyond what we say about ourselves.
Infinity by Marvin Platinum Partner badge for 2025American Architectural Manufacturers Association logo for AAMA-certified window and door installation standards.
Visit Our Local Showroom

Most homeowners who visit our Pleasanton showroom tell us the same thing: they had no idea how different fiberglass feels from vinyl until they held both. Full-size displays, real product samples, and zero sales pressure, just a better basis for your decision.

SCHEDULE A VISIT →
Speak With One of Our Designers

Not sure where to start? Our design consultants have helped thousands of East Bay homeowners sort through window styles, glass packages, finish options, and budgets. Bring your questions, there's no obligation and no pressure to decide on the spot.

SPEAK WITH A DESIGNER →

Common Questions from Bay Area Homeowners

How much do replacement windows, siding, or entry doors cost in the East Bay?
Pricing varies based on your home’s size, the products selected, and the scope of installation. Premium products like Infinity from Marvin fiberglass windows and James Hardie fiber cement siding carry a higher upfront cost than vinyl or builder-grade alternatives. They also last significantly longer and require far less maintenance, and in most cases, the long-term math favors the better product.

We provide free, no-pressure estimates with itemized pricing. We’d rather help you understand your options than give you a number that surprises you later.

Are fiberglass windows worth the additional cost compared to vinyl?
For most Bay Area homeowners, yes. Fiberglass expands and contracts at nearly the same rate as the glass itself, which means seals stay intact longer. particularly across the wide temperature swings between Tri-Valley summers and wet winters. Vinyl doesn’t behave the same way, and the difference in seal integrity becomes visible over time. Infinity from Marvin fiberglass windows also qualify for multiple glass packages that meet California’s Title 24 energy standards.

Is James Hardie siding worth it compared to vinyl or wood?
Fiber cement siding costs more upfront than vinyl. It also lasts two to three times longer with dramatically less maintenance. Over a 20-year window, the economics typically favor James Hardie. For homeowners near wildfire-prone areas of the East Bay, the non-combustible construction adds a layer of protection that vinyl cannot offer. We invite homeowners to visit our Pleasanton showroom, where you can explore full-size product displays, compare styles, and speak with our team. Seeing and touching the materials in person helps you make a more confident decision.

Can I see the products before making a decision?
Yes, and we strongly encourage it. Our Pleasanton showroom has full-size displays of the products we install, including fiberglass windows, James Hardie siding samples in multiple finishes, and entry door configurations. Seeing and handling the materials in person removes the uncertainty from the decision. Schedule an appointment to visit our showroom during the week or from 10-2 on Saturday.

What makes Custom Exteriors different from other contractors?
A few things worth verifying rather than taking on our word: we’ve been at the same location in Pleasanton since 1997 with over 30,000 completed projects in the East Bay. Our installers are full-time Custom Exteriors employees. not subcontractors. and they hold AAMA Certified Master Installer credentials. We’re Diamond Certified based on independent customer satisfaction surveys. We’re an Infinity from Marvin Platinum Partner. Custom Exteriors is EPA Lead-Safe Renovation, Repair, and Painting (RRP) Certified, a federal certification required for renovation work on homes built before 1978, where lead-based paint may still be present. And we have a physical showroom where you can see every product we install before you commit.

Special Offer!
18 Months
ZERO Payments + ZERO Interest OR 4.99% Financing on Approved Credit
LEARN MORE →

A Seamless Remodeling Experience with Custom Exteriors

As a leading exterior remodeling company, Custom Exteriors prides itself on delivering a smooth and worry-free window, siding and door replacement process. We start with a thorough consultation, providing comprehensive design guidance to ensure that every detail aligns with your vision for your home as well as your needs and budget.

Our project team brings decades of hands-on experience working with homes throughout Pleasanton and the surrounding Tri-Valley area. We understand the architectural styles, neighborhood requirements, and local considerations that matter most when planning a window, siding, or door replacement project. Our experts provide thoughtful design guidance, product recommendations, and clear planning support to help you make confident decisions and achieve the best result for your home.

Our team of full-time installers (not sub-contractors) brings your project to life with precision and care, keeping you informed at each step. Our installers undergo extensive training and have advanced credentials, such as AAMA certification, so you can rest easy knowing they’ll deliver superior workmanship. Most importantly, we uphold our Five Core Values throughout, guaranteeing a customer experience marked by Integrity, Pride, Effort, Thoughtfulness, and meticulous Attention to Detail.

Convenient Financing Options

Make your project more affordable with easy financing options. On approved credit.

Hear from homeowners like you

Verified reviews from across Pleasanton and the Tri-Valley, not handpicked quotes.

"My experience with Customer Exteriors has been positive from start to finish! I had two windows replaced and siding installed on the front of my home. Custom Exteriors was recommended to us by our friend Jay who had you do his home a few years back. I am so happy that we had this recommendation and will let all that come by know that Custom Exteriors did the work and that we are very pleased with your work."

Kathy Ricard

Fremont, CA

"Great experience with custom exteriors replacing all of our windows (20+) in our 1940s Menlo Park home. We did ours through the Costco program (which locks you into the Marvin Infinity line…good value premium fiberglass window with sound package). Will definitely be using them again for future projects, and would recommend to anyone looking for trustworthy installer!"

Ken Tran

Menlo Park, CA

"Had a team of installers -Mr. Francisco Sanchez and team did what I will refer to as the perfect installation for my windows. The team was very professional and kind, their work is the best I have witnessed in my lifetime! The team has made window installation an art. Flawless, no debris left behind, this team left me close to tears. They deserve a 20% raise; if I had a business I would seek this team out - they have the highest standards and then some."

Modesta Jimenez

Santa Clara, CA

Five-Star Reviews

Read Our Google Reviews

Click the map to see who we’ve helped in your neighborhood.