<

James Hardie Siding Replacement in San Francisco, CA

Serving San Francisco, the East Bay, and the greater Bay Area since 1997

Custom Exteriors replaces siding on San Francisco homes with James Hardie fiber cement, installed by our own full-time crews, not subcontractors. James Hardie siding resists rot, moisture, and pests, is classified as noncombustible, and carries a 30-year non-prorated product warranty. We have served Bay Area homeowners since 1997, with 30,000+ completed projects, and we handle San Francisco's siding permit process for you.

Schedule a no-pressure consultation

San Francisco homes we work on, and what each one needs

San Francisco siding has two jobs: standing up to fog, wind, and salt air, and fitting the city's architecture and design rules. The right James Hardie profile depends on your neighborhood, your home's age, and which walls face the street.

Sunset, Richmond, and other fog belt neighborhoods

In the western neighborhoods, the priority is siding that does not stay wet. Homes in the Outer Sunset, Outer Richmond, and Parkside sit in fog and salt air for much of the year. Wood siding on their side and rear walls rarely dries out fully, so paint fails, butt joints soak up water, and rot spreads into the trim and sheathing.

  • HardiePlank lap siding replaces worn wood lap siding with fiber cement that does not rot or swell when it gets wet.
  • HardieTrim boards replace the wood trim around windows and corners, where water damage usually starts.
  • Stucco fronts need Planning review first. Many homes in these neighborhoods have stucco street facades. Changing a street-facing finish, such as stucco to siding, goes through plan review instead of the online permit. We will tell you upfront whether your project needs it.

Victorians, Edwardians, and historic districts

On historic homes, James Hardie siding usually belongs on the rear and side walls, not the street facade. San Francisco's Victorians and Edwardians in neighborhoods like Noe Valley, the Haight, and Pacific Heights get their character from ornate street-facing woodwork. Planning often requires those facades to stay wood, or to be restored in wood.

  • Rear and side walls are where fiber cement does the most good on a historic home. They take the most weather, they are rarely visible from the street, and they are where hidden rot usually starts.
  • HardiePlank lap siding in a smooth or woodgrain texture matches the lap profiles on older homes.
  • Check historic status first. Landmark buildings need a historic approval from San Francisco Planning before a building permit is issued, and homes in historic districts may face added review. We will help you confirm your property's status before you choose.

Hillside and mid-century homes

For homes on San Francisco's hills, the focus is wind, weather, and a clean modern look. Houses in Twin Peaks, Diamond Heights, Glen Park, and Bernal Heights take more wind-driven rain than homes in the flats, and many have original plywood or wood siding from the 1950s through the 1970s.

San Francisco's siding permit rules

San Francisco requires a building permit to replace siding, and Custom Exteriors handles it for you. The City's Department of Building Inspection publishes the process:

  • In-kind replacements. Siding replacements can be applied for online. The application covers the square footage, the existing and proposed siding material, and the existing and proposed design.
  • Street-facing finish changes. Changing the finish on a facade visible from the street, such as stucco to siding, goes through the City's in-house plan review, with plans.
  • Landmark buildings. Landmark buildings need an Administrative Certificate of Appropriateness or a Minor Permit to Alter from San Francisco Planning before the building permit.
  • Code requirements. The installation must meet current San Francisco code for insulation, weather protection, materials, coatings, and fire resistance.

The City's stated goal is to approve most online siding permits within two business days. Projects that need plan review or historic approval take longer, so we build that time into your schedule.

San Francisco's fire rules for siding

In San Francisco, siding fire requirements come mostly from the building code, not wildfire maps. The City requires siding installations to meet code for resisting fire and blocking fire from getting inside the wall. On closely spaced homes, that matters for every exterior wall.

Wildfire risk in San Francisco is limited. The state's fire hazard maps place some wooded areas near parks, such as Mount Davidson, Glen Canyon, Stern Grove, Lincoln Park, and the Presidio, in a Moderate zone. Use the San Francisco Fire Department's Fire Hazard Severity Zone map to check your address.

No siding is fireproof. A home's fire resistance also depends on its roof, vents, eaves, windows, and what is next to the house.

Why we install James Hardie siding

James Hardie fiber cement is the only siding we install, because it fixes the problems that wear out wood, hardboard, and plywood siding. After evaluating siding products for nearly three decades, it is what we recommend to every homeowner.

  • Rot and pest resistant. Fiber cement does not rot, swell, or delaminate when it gets wet, and does not attract termites or woodpeckers.
  • Noncombustible. Classified as noncombustible under ASTM E136, with a Class A flame spread rating under ASTM E84.
  • A finish that lasts. ColorPlus Technology is a factory-baked finish that holds color longer than paint applied on site, backed by a 15-year limited finish warranty.
  • A real warranty. A 30-year non-prorated limited product warranty on the siding.

Most San Francisco homes were built before 1979, and the City's Building Code presumes the exterior paint on those homes contains lead. Lead-safe work practices are required when that paint is disturbed. We are EPA Lead-Safe RRP Certified and follow lead-safe practices during siding removal.

Replacing siding and windows together

If your windows are original, replacing them with your siding usually gives you a better result. With the siding off, we can install new windows using the new construction method, so each opening is fully flashed and sealed. In fog belt neighborhoods, that flashing is often where hidden water damage gets found and fixed.

See our [San Francisco windows page](https://custom-exteriors.com/service-area/[CONFIRM URL]) for the Infinity by Marvin fiberglass windows we install.

Why San Francisco homeowners choose Custom Exteriors

San Francisco homeowners hire us because they can verify who does the work and who stands behind it.

  • Full-time employee installers, not subcontractors. The crew that installs your siding works for Custom Exteriors. Here is why that matters.
  • Since 1997. We have served Bay Area homeowners for nearly three decades, with 30,000+ completed projects.
  • San Francisco permits handled, including plan review for street-facing changes and historic approvals for landmark buildings.
  • Lead-safe work. EPA Lead-Safe RRP Certified, which matters in a city where most homes predate 1979.
  • Third-party recognition. Diamond Certified and BBB Accredited. See our awards and reviews.
  • Warranty coverage. James Hardie's product warranties plus our own product and labor warranty.

Frequently asked questions

Q: Do I need a permit to replace siding in San Francisco? A: Yes. San Francisco requires a building permit to replace siding. In-kind replacements can be applied for online, changing a street-facing finish such as stucco to siding goes through plan review, and landmark buildings need a historic approval from San Francisco Planning first. Custom Exteriors handles the permit for you.

Q: Can I put James Hardie siding on my Victorian or Edwardian? A: Usually on the rear and side walls, and sometimes on the front. On landmark buildings and in historic districts, San Francisco Planning may require street-facing facades to stay wood or be restored in wood. Rear and side walls take the most weather and are where fiber cement helps most. We can help you confirm what applies to your home.

Q: Is my San Francisco home in a fire hazard zone? A: Most likely not. San Francisco's wildfire hazard zones are limited to some wooded areas near parks and open space, such as Mount Davidson, Glen Canyon, and the Presidio, and are rated Moderate. Use the San Francisco Fire Department's Fire Hazard Severity Zone map to check your address. Building code fire requirements apply to every siding project.

Q: Is James Hardie siding fireproof? A: No siding is fireproof, but James Hardie siding is noncombustible. It is classified as noncombustible when tested to ASTM E136 and has a Class A flame spread rating under ASTM E84, so it will not ignite or add fuel to a fire.

Q: Do you serve all of San Francisco? A: Yes. We serve homeowners throughout San Francisco, from the Sunset and Richmond to Noe Valley, Glen Park, and Bernal Heights. Our free consultations are done at your home, and our full-size product displays are in our Pleasanton showroom.

Q: How much does James Hardie siding cost in San Francisco? A: Cost depends on the size of your home, how much old siding has to come off, the condition of the wall underneath, the profile and finish you choose, and how much trim and soffit is involved. Lead-safe removal, tight lot lines, and plan review can add to the scope on San Francisco homes. See our siding pricing guide for the main factors. We provide free, itemized estimates so you know exactly what you are paying for.

Ready to replace the siding on your San Francisco home?

Schedule a free, no-pressure consultation at your home. We will look at your current siding, check for damage underneath, walk through profiles, colors, and any design or permit rules that apply, and give you an itemized estimate, with no obligation.

Schedule a no-pressure consultation | Visit our Pleasanton showroom (2142 Rheem Drive, Suite E, Pleasanton, CA 94588) Phone: (925) 249-2280

Financing options

We offer 18 months with no payments and no interest if the balance is paid in full within the promotional period, or 4.99% financing on approved credit. Ask about options during your consultation.

See financing details

Nearby areas we also serve

Custom Exteriors also serves nearby:

Daly City

San Mateo

Oakland

Berkeley

Sausalito

‍

Custom Exteriors Inc. | 2142 Rheem Drive Suite E, Pleasanton CA 94588 | (925) 249-2280 | custom-exteriors.com CA License #785361

Visit Our
Local Showroom
Showroom Details
Speak With A
Design Expert
Schedule a Consultaton

Convenient Financing Options

Make your project more affordable with easy financing options. On approved credit.
Five-Star Reviews

Read Our Google Reviews